Pairing a New Remote or Channel with the Shade

This guide covers the following shade types: Cellular Shades, Plain Fold Roman Shades, and Soft Fold / Hobbled Roman Shades.

Watch the video below to learn How to Pair a New Remote or Channel with the Shade.

• Please note that if your remote control or wireless wall switch is a 2-channel device, 
  Channel 1 corresponds to the programming button labeled “P1.” 
  Channel 2 corresponds to the programming button labeled “P2.”

• If it is a 6-channel or 15-channel device, select the desired channel first. The P button will then function as the programming button for the selected channel.

Method 1: Using the Program Button on the Motor

Step 1: PRESS AND HOLD the motor’s Programming button for about 2 seconds. 
When the shade jogs once, release the button. 

Step 2: Select the remote or channel you want to add. 
BRIEFLY PRESS AND RELEASE the P button on the back of the remote. Note: Do not hold the button. 
(For wireless wall switches, use a paperclip or similar item.) 
The shade will jog once. 
At this point, the remote or channel has been successfully paired.

Method 2: Remote-to-Remote Pairing

Step 1: Select the remote or channel that is paired with the shade. 
PRESS AND HOLD the P button on the back of the remote for about 2 seconds. (For wireless wall switches, use a paperclip or similar item.) When the shade jogs once, release the button. 

Step 2: Select the remote or channel you want to add. 
BRIEFLY PRESS AND RELEASE the P button on the back of the remote. Note: Do not hold the button. 
The shade will jog once. 
At this point, the remote or channel has been successfully paired.

Can't find the answers you're looking for?

We're here to help. Contact our support team at

service@smartwaveshades.com.