Installation Tips for Drapery Valance

Step-by-Step Installation Guide

1. Align the Center First
   Position the center of the valance with the center of the Valance Hanging Bracket.
   Press firmly in the middle to secure the initial anchor point.

2. Work Outward from the Center
   After securing the center, slowly smooth the valance toward the left and right sides.

3. Apply Gentle Tension While Pressing
   As you move outward, lightly pull the fabric to keep it straight and smooth.
   Press firmly along the Valance Hanging Bracket while maintaining slight tension to help avoid wrinkles and air bubbles.

Important Notes

• Apply even pressure to ensure full contact with the adhesive surface.

• Do not pull too hard, as excessive tension may cause misalignment or affect the overall alignment.

Additional Tip

If there are slight wrinkles on the fabric surface after installation, you may use a garment steamer to gently steam the fabric for a smoother finish.