Adjusting the Shade’s Operating Speed – SmartWave Shades

This guide covers the following shade types: Roller Shades, Zebra Shades, Cordless Roman Shades, Woven Wood Shades, Shangri-La Shades, Outdoor Shades, and Dual Shades.

📘 Note:
1. SmartWave shades are set to standard speed by default.
2. You can switch to high speed to make the shades operate faster.
3. However, increasing the operating speed may also result in higher noise levels.

Watch the video below to learn How to Adjust the Shade’s Operating Speed.

💡 Tip: If your shades are powered by a rechargeable Li-Ion battery, disconnect all charging plugs from the shades, including the solar panel plug, before making any settings to ensure the motor indicator light works correctly.

Switch to High Speed

PRESS AND HOLD the UP and STOP buttons on the remote at the same time for 2 seconds.
When the shade jogs once, release both buttons.
The indicator light will turn green and flash 5 times, indicating the setting is complete.

Switch to Standard Speed

PRESS AND HOLD the STOP and DOWN buttons on the remote at the same time for 2 seconds.
When the shade jogs once, release both buttons.
The indicator light will turn green and flash 5 times, indicating the setting is complete

Can't find the answers you're looking for?

We're here to help. Contact our support team at

service@smartwaveshades.com.

Switch to High Speed

Switch to Standard Speed

Related articles