This guide covers the following shade types: Roller Shades, Zebra Shades, Cordless Roman Shades, Woven Wood Shades, Shangri-La Shades, Outdoor Shades, and Dual Shades.

Watch the video below to learn How to Delete a Remote or Channel from the Shade.

• Please note that if your remote control or wireless wall switch is a 2-channel device, 
  Channel 1 corresponds to the programming button labeled “P1.” 
  Channel 2 corresponds to the programming button labeled “P2.”

• If it is a 6-channel or 15-channel device, select the desired channel first. The P button will then function as the programming button for the selected channel.

Method 1: Using the Program Button on the Motor

Step 1: Using a paperclip or similar item, PRESS AND HOLD the motor’s Programming button for about 2 seconds. 
When the shade jogs once, release the button. 
The indicator light will turn orange and begin flashing continuously.

Step 2: Select the remote or channel you want to delete.
BRIEFLY PRESS AND RELEASE the P button on the back of the remote. Note: Do not hold the button. 
(For wireless wall switches, use a paperclip or similar item.) 
The shade will jog once. The orange flashing indicator light will turn off, then flash green 5 times, confirming successful deletion.

Method 2: Using the P Button on the Remote to Be Deleted

Step 1: Select the remote or channel you want to delete. 
PRESS AND HOLD the P button on the back of the remote for about 2 seconds. 
(For wireless wall switches, use a paperclip or similar item.) 
When the shade jogs once, release the button. 
The indicator light will turn orange and begin flashing continuously.

Step 2: Then, on the same remote, BRIEFLY PRESS AND RELEASE the P button again. Note: Do not hold the button. 
The shade will jog once. 
The orange flashing indicator light will turn off, then flash green 5 times, confirming successful deletion.

Can't find the answers you're looking for?

We're here to help. Contact our support team at

service@smartwaveshades.com.