This guide covers the following shade types: Drapery.

Watch the video below to learn How to Delete a Remote or Channel from the Drapery.

• Please note that if your remote control or wireless wall switch is a 2-channel device, 
  Channel 1 corresponds to the programming button labeled “P1.” 
  Channel 2 corresponds to the programming button labeled “P2.”

• If it is a 6-channel or 15-channel device, select the desired channel first. The P button will then function as the programming button for the selected channel.

Method 1: Using the Program Button on the Motor

Step 1: PRESS AND HOLD the motor’s Programming button for about 2 seconds. 
The indicator light will turn green, then change to orange and begin flashing.

Step 2: Select the remote or channel you want to delete.
BRIEFLY PRESS AND RELEASE the P button on the back of the remote. Note: Do not hold the button. 
(For wireless wall switches, use a paperclip or similar item.) 
The indicator light will flash green three times and then turn off, confirming successful deletion.

Method 2: Using the P Button on the Remote to Be Deleted

Step 1: Select the remote or channel you want to delete. 
PRESS AND HOLD the P button on the back of the remote for about 2 seconds. 
(For wireless wall switches, use a paperclip or similar item.) 
The indicator light will flash green three times, then switch to orange and continue flashing.

Step 2: Then, on the same remote, BRIEFLY PRESS AND RELEASE the P button again. Note: Do not hold the button. 
The indicator light will flash green three times and then turn off, confirming successful deletion.

Can't find the answers you're looking for?

We're here to help. Contact our support team at

service@smartwaveshades.com.